Model CTC-6HW HIGH WATT LOAD, Optical Access Cryostat

CTC-6 Cryostat is designed to absorb high thermal loads and minimize sample temperature changes. Allowing you to study the changes and properties of samples under high laser thermal load.

: CTC-6HW vertical, tail section, radiation shield removal

: CTC-6HW VERTICAL

: CTC-22 AUTO FILL/LEVEL CONTROLLER SYSTEM, COMPLETE WITH TRANSFER LINE, SENSORS(shown above), CRY-VALVE AND CONTROLLER(not shown), THIS SYSTEM PROVIDS LIQUID N2 TO THE DEWAR SECTION FOR CONTINIOUS OPERATION

Features of the CTC-6 Type Cryostats

Customer is free to add or delete features to meet the needs of the research

Customer may order any number of windows as they need (none, 1, 2, 3, 4, or full 360 clear view)
Tail sections have quick access (no tools required)
Temperature Range of 4K to 425K
Heater, dual element heater disc, both 25 and 50 ohm, with 32 AWG Phosphor Bronze or copper leads and connector. standard
1.00″ Dia. Sample Mounting block for cold finger
Tail Section connected to main body with a “V” type clamp band for Quick access
Standard Tail Section with removable windows frames to hold windows (standard quartz)
Optional extra Window frames can be made to hold any type of window required
Windows are to be sealable with o-ring or indium seals
Fully vacuum jacketed Tail Section
Vapor Cooled Thermal Radiation Shield is polished and gold plated. Tail section of radiation shield is spring friction fit to vapor cooled thermal shield for Quick access. Thermal Radiation Shield is Optional
KF-25 Vacuum flange port
Cryogen fill/vent port, KF-25 flange 1.00″ ID
Indirect cooling by cryogen liquid helium or nitrogen, 1-2 liter capacity
Vacuum tight manifold provides for 2- 1.25″ X 1.25″ flanges for feed-through mounting
One, 15 pin, Sub-min D type electrical/vacuum feed-through on a vacuum flange. Standard
4 BNC type electrical feed-throughs on a vacuum manifold. Optional
Main body dimensions, app. 8″ OD x 12″ long
All joints and seals to be helium leak tested to 1×10-7 Std. c.c./sec
Setup and basic operation manual

I would like a cryostat similar to this one CTC-6 »

Y0u tell us what you want to do. Then, We will design your sample holder.

Examples of the many possible custom Cold Fingers, each with different temperature sensor placements, sample mountings, window exposures and sample contacts.

: 100 WATT FAST RAMPING CTC TYPE COLD FINGER WITH 40 PIN DIP SOCKET

: 44 LCC PACKAGE NON-MAGNETIC CTC TYPE COLD FINGER

: A CTC-6H SHOWN WITH VACUUM TAIL SECTION REMOVED VIEW OF THE GOLD THERMAL RADIATION SHIELD AND SAMPLE CONTACT RING

: SHOWN WITH RADIATION SHIELD AND CONTACT RING REMOVED VIEW OF 4 CRYO-COAX CABLES READY FOR CONNECTION TO THE REPLACEABLE GOLD SPRING LOADED CONTACTS IN THE CONTACT RING (the green contact ring is next to the gold radiation shield)