Our CTC-6 Cryostat is designed for quick and easy sample changes. Now changing samples can be accomplished easily, reliably and quickly without tools.
- CTC-6 Vertical
- Easy no-tool disassembly tail section allows quick access to cold finger without warming up the Dewar section of cryostat
- CTC-22 Auto Fill/Level Controller System, Complete with Transfer Line Sensors, Cry-Valve and Controller
High Watt Absorbtion Option of the CTC-6 Type Cryostats
Features of the CTC-6 Type Cryostats
Customers are free to add or delete features in order to meet the needs of their research!
- Customer may order any number of windows as they need (none, 1, 2, 3, 4, or full 360 clear view)
- Tail sections have quick access (no tools required)
- Temperature Range of 4K to 425K
- Heater, dual element heater disc, both 25 and 50 ohm, with 32 AWG Phosphor Bronze or copper leads and connector. standard
- 1.00″ Dia. Sample Mounting block for cold finger
- Tail Section connected to main body with a “V” type clamp band for Quick access
- Standard Tail Section with removable windows frames to hold windows (standard quartz)
- Optional extra Window frames can be made to hold any type of window required
- Windows are to be sealable with o-ring or indium seals
- Fully vacuum jacketed Tail Section
- Vapor Cooled Thermal Radiation Shield is polished and gold plated. Tail section of radiation shield is spring friction fit to vapor cooled thermal shield for Quick access. Thermal Radiation Shield is Optional
- KF-25 Vacuum flange port
- Cryogen fill/vent port, KF-25 flange 1.00″ ID
- Indirect cooling by cryogen liquid helium or nitrogen, 1-2 liter capacity
- Vacuum tight manifold provides for 2- 1.25″ X 1.25″ flanges for feed-through mounting
- One, 15 pin, Sub-min D type electrical/vacuum feed-through on a vacuum flange. Standard
- 4 BNC type electrical feed-throughs on a vacuum manifold. Optional
- Main body dimensions, app. 8″ OD x 12″ long
- All joints and seals to be helium leak tested to 1×10-7 Std. c.c./sec
- Setup and basic operation manual
If you would like a cryostat similar to this one, CTC-6, email us here! »
You tell us what you want to do. Then, We will design your sample holder.
Examples of the many possible custom Cold Fingers, each with different temperature sensor placements, sample mountings, window exposures and sample contacts.
- 100 WATT FAST RAMPING CTC TYPE COLD FINGER WITH 40 PIN DIP SOCKET
- 44 LCC PACKAGE NON-MAGNETIC CTC TYPE COLD FINGER
- A CTC-6H SHOWN WITH VACUUM TAIL SECTION REMOVED VIEW OF THE GOLD THERMAL RADIATION SHIELD AND SAMPLE CONTACT RING
- SHOWN WITH RADIATION SHIELD AND CONTACT RING REMOVED VIEW OF 4 CRYO-COAX CABLES READY FOR CONNECTION TO THE REPLACEABLE GOLD SPRING LOADED CONTACTS IN THE CONTACT RING (the green contact ring is next to the gold radiation shield)
- CTC-6 WITH MICROSCOPE OBJECTIVE IN VACUUM AND X-Y-Z POSITION STAGE
- CTC TYPE COLD FINGER WITH HEAVY SPRING LOADED CONTACTOR BAR WITH 2 ELECTRICAL AND ONE THERMAL SENSOR (middle)