VE-11 ~ Vacuum Impregnator, Encapsulator, and Degas for degassing / deairing and filling parts and molds with resins, epoxy or liquids (oils or water based) under vacuum.
Abbess Instruments’Vacuum impregnator, Vacuum filler allows you to fully evacuate a product or specimen, then with all the air and moisture removed, fill the product or specimen with liquid, casting , mounting or potting compound or resin that can penetrate the full pore depth of the sample or product.
-
-
Simple Vacuum Filling http://abbess.com/vacuum/vacuum-ve11/
-
-
3-5 psig latch set – optional

Standard Features
Material: |
- Aluminum with clear Acrylic lid
|
Interior Dimensions: |
- Standard – 6″ and12″ deep X 11″ inner diameter
- Customs in 8″ 11″ 15″ and 28″ Diameters
- Need a Larger chamber? See our big chambers
|
Included Features: |
|
Included Features: |
- Vacuum connection 3/8 hose barb with needle valv
- Vacuum break needle valve and filter
- Vacuum Gauge with a dial registering 0 to 30″ of Hg and 0 to -100 kPa
- Unheated
|
Optional Features/Items: |
- Liquid Feed-thrus and valves for filling molds in vacuum
- Electronic vacuum cycle timer with Vacuum Regulator and manual override
- Lids and doors of chambers are available in Aluminum, Stainless Steel, or Acrylic
- Heated shelves for keeping potted items at a controlled temperature for cure
- Non-stick coating – Surfaces protected by a #8-403 PTFE non-stick coating
- Vacuum Regulator
- Window: windows were you want them
- Heated + 200C or Cryogenic -196C/-320F
|