|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
VCE-14
Vacuum Encapsulator and Degassing System
Installed in a 14 inch cube chamber - CURRENT DESIGN OF VE-14
Use you credit card or prepay and get expedited fabrication & delivery
allows you to fully evacuate a product or specimen, Resulting a zero bubble defect product or sample This vacuum chamber is designed to be a rugged bench top unit in production or testing. Some of our customers find this to be a practical size for use in vacuum degassing of liquids, plastics resins, and epoxies as well as drying parts or product. With optional thermal shelves, these thermal vacuum chambers can be very effective in degassing polymeric mixtures containing silicones, urethanes and epoxies. Many optional features may be included such as windows, lights, electrical feed-thrus and liquid feed-thrus and valves for filling molds in vacuum. This chamber is also used in many other industries where vacuum work is required. It is constructed of welded 304 Stainless Steel with interior standard dimensions of 14" high x 14" deep x 14" wide, custom dimensions are also an option. The door seal is now a (customer replaceable) 3/16" thick O-ring seal to withstand repeated closings. Two draw latches close the front hinged door. All chambers are vacuum tested to 29.92 inch(Hg) or better (10-4 torr) and should maintain this for its life dependent on seal condition and customer use.
then with all the air and moisture removed,
fill the product or specimen with casting, mounting or potting compound or resin
that can penetrate the full pore depth of the sample or product.
|
Standard Features
|
|
|---|---|
| Material: | Welded Aluminum |
| Interior Dimensions: | Standard - 14" deep X 14" vertical X 14" horizontal Need a Smaller chamber? See our econo chamber Need a Larger chamber? see our big chambers |
| Vacuum: | Down to 29.92 inch(Hg) under dynamic vacuum
Need a Vacuum Pump ? |
|
Included Features:
|
Hinges located on the right hand side (customer may spec. other)
Vacuum connection 3/4 NPTF with ball valve, located on top right qty 3, 1/2 NPTF ports on top corners Unheated Vacuum Gauge with a dial registering 0 to 30" of Hg and 0 to -100 kPa Standard Latches |
| Optional Features: |  Liquid Feed-thrus and valves for filling molds in vacuum |
Electronic vacuum cycle timer with Vacuum Regulator and manual override |
|
| Doors of chamber are available in Acrylic, Aluminum, Stainless Steel |
|
| Heated shelves for keeping potted items at a controlled temperature for cure |
|
| Non-stick coating - Surfaces protected by a #8-403 Teflon coating |
|
| Lights |
|
| Vacuum Regulator |
|
| Window: windows were you want them |
|
| Heated + 200C or Cryogenic -196C/-320F |
|
| In vacuum, Rotary Mixing |
|
| Shelf brackets for Trays or Heated Shelves |
|
| Vacuum Break quick-connect 1/2 NPTF, top right front, with internal diffuser |
|
| Vacuum pumps and vacuum systems |
|
Back to top of Abbess Main Home Page
 |
 |
|||
 |
||||
|
If you have any questions, need custom configurations, or a quotation,
please e-mail us at
|
||
