Vacuum Infusing and Impregnating System

Vacuum infusing, vacuum impregnating, and vacuum filling can greatly improve the product quality of 3D printed items. Works well for: Locked sands, woods, fibers, clays, powders, rocks, sands, SLS, 3DP, or SLA forms, foods, insects and plants These vacuum infusing chambers are constructed of heavy alloy. Our customers find this to be a practical construction for use in vacuum degassing and vacuum processing of all sorts of items including, but not limited to: foods, herbs, papers, liquids, jells, powders, plastics … Read More

Vacuum Mixing & Casting System with PC Based Controller

Vacuum Sequencer and Cycle Timer with Vacuum Regulator The Degassing/Mixing Chamber has a clear Acrylic lid with four latches to maintain the seal while under pressure. The lid has a manual rotary feedthru and handle attached. To the shaft of this feedthru is attached a mixing impeller, sized appropriately for the encapsulant container being used. The chamber accommodates plastic beakers of various sizes. The beakers are held down using three threaded rods with wing nuts and a cover plate. There … Read More

VE-11 Vacuum Chamber, Liquid Filling

VE-11 ~ Vacuum Impregnator, Encapsulator, and Degas for degassing / deairing and filling parts and molds with resins, epoxy or liquids (oils or water based) under vacuum. Abbess Instruments’Vacuum impregnator, Vacuum filler allows you to fully evacuate a product or specimen, then with all the air and moisture removed, fill the product or specimen with liquid, casting , mounting or potting compound or resin that can penetrate the full pore depth of the sample or product.   Standard Features Material: … Read More

VE-24 and VE-36 Inch Cubes, Non Stick, PTFE

Abbess Instruments’ Vacuum System, allows you to fully evacuate a product or specimen, then with all the air and moisture removed, fill the product or specimen with casting, mounting or potting compound or resin that can penetrate the full pore depth of the sample or product. Resulting a zero bubble defect product or sample This vacuum chamber is designed to be a rugged bench top unit in production or testing. Some of our customers find this to be a practical … Read More

High Vacuum Acrylic Bell Chamber

The Thermal Vacuum Chamber System allows items placed inside to be contained in a vacuum environment to facilitate customer process production requirements. The entire system can be controlled manually, by starting/stopping the pump(s) and opening/closing valves. Optionally, a Vacuum Cycle Controller (VCC) is used to automate some or all of the control functions. The VCC enables system control via panel-mounted buttons and indicators and can optionally be controlled by a PC with a user-specific Graphical User Interface (GUI).   The … Read More